Can you over shock a pool? Which things should you consider to avoid over-shock? Yes, you can over-shock a pool. You can avoid a few common maintenance mistakes to keep your pool clean and safe. You can both under-shock and over-shock your pool with maintenance mistakes. You will have to use the proper amount of liquid chlorine depending on your pool type. Excessive use might cause over-shock your pool.

Can You Over Shock a Pool?

can you over shock a pool

If you over-shock your pool, it will bleach your pool liner. In that condition, you cannot repair your pool to bring back the functionality as shocking your pool is different from sanitizing it. You will be left with no other choice except for the replacement. Needless to mention, you will have to spend much more on the replacement.

How to Fix an Over-Shocked Pool

Step One

First, you will need a chlorine test kit to measure the chlorine level in your pool. When your pool is over shocked, the test will show a high level of free chlorine. Different types of chlorine test kits are available in the current market. Therefore, you should read the instructions carefully to get the most accurate result.

Step Two

Don’t know when to shock your pool? It is best to shock your pool when the sun is down. While applying this step, make sure that there is no swimmer in your pool. You will have to take extra caution while treating your pool for excessive chlorine. You should also know how to properly add liquid chlorine to your pool during this step.

Step Three

Turn on the filtration pump of your pool. You will have to get half an ounce of the sodium thiosulfate for one thousand gallons of water. You can directly add the sodium into the middle of your pool and leave it for thirty minutes.

Step Four

Now turn off the pump of your pool and unplug it. Now check the chlorine level again. If the result comes high, you will have to repeat the same process. Otherwise, replace your pool filters with new ones.

Step Five

Plug the pool filtration pump in and then turn it on. You will have to test the chlorine level once every week to get the optimal result. The most important thing is to follow the instructions carefully while adding new chlorine to your pool. If you do so, you can prevent over-shock.

You will have to maintain the free chlorine level around 2.0 ppm to get a stable pH level. You can use sodium thiosulfate to neutralize the chlorine whenever you want. Sodium thiosulfate acts as an instant chlorine neutralizer that can also be used to dilute chlorine levels. If your pool does not omit a chlorine odor, then the water is perfectly balanced and you do not need to use a test kit to know the free chlorine level.

Last Words

Can you over shock a pool? Now you know the answer to this common pool problem. However, you will have to take caution for a saltwater pool. After following all the above-mentioned steps, you will have to turn down your salt cell system and then check the chlorine level. Keep the salt system for a while since the sock might last for days to a week. Keep checking the chlorine level. When you find the proper balance, you can turn on the cell system again.